The bolt pattern for a 2020 Cadillac CT6-V is 5x120 (or 5x4.72 ), indicating that each wheel has five bolts (or lugs) that are arranged circularly with a 120 mm (4.72 inches) diameter.
One of the simplest yet cool 2020 Cadillac CT6-V mods is to replace stock wheels with bigger aftermarket options.
However, before you switch, you must know your 2020 Cadillac CT6-V lug pattern to confirm compatibility with the new set of wheels. But even if the current bolt pattern of your 2020 Cadillac CT6-V and the new wheels do not match, consider converting to the required scheme using the wheel adapters.
Also, new rims must sit within the wheel offset range, and the 2020 Cadillac CT6-V's stud must fit onto the hub bore. Use the measurements below while searching for new wheels.
A bolt pattern, or lug pattern, is a two-number system used to measure the imaginary circle (PCD) formed by the lug holes at the center of a wheel. The first number counts the holes in the wheel, while the second number indicates the pitch circle diameter in mm or inches.
A machined opening in the center of the wheel. It must be "Hub Centric" to reduce vibration.
The outer diameter of your wheel stud threads in either metric (M12, M14, etc.) or standard units (1/2", 9/16", etc.).
Dimensions of the stock tires, including its width, aspect ratio (sidewall), and diameter.
Dimensions of rims recommended by the manufacturer.
These two-piece conversion-type wheel adapters are used to convert 6-lug vehicles with 5.5" (139.7mm) bolt patterns to fit wheels with 8x180 bolt patterns. Mostly used for 6-lug Chevy Tahoe, Suburban, etc to install 8-lug Ford wheels. They will also space out your wheels for 2-inch to help you get enough clearance for wider tires and rims. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High-quality studs are pre-installed.
Vehicle Side Fitments:
4 Anodized Aluminum Hub-Centric Rings with 4 Fixed Rubberize Ring (One Set)
Includes 20 Chrome M14 x 1.50 Duplex Spline Lug Nuts, 1 Socket Key
Specifications: M14 x 1.50 Thread Pitch, 2” Overall Height, 0.92” Diameter, 60-Degree Conical Seat, anti-theft s...Check price on
Specifications: M14x1.50 Thread pitch, 4.4” Overall height, 0.92” Diameter, 60-degree Conical Seat, Bulge Acorn design, anti-theft spline design. Chrome Finish. For 8-lug vehicles.<... Check price on